Does anyone know the ramifications of changing the IP address of an existing Citrix server? We set up 2 TSE4.0/MF1.8 servers years ago with the wrong IP scheme and want to change them to a new non-routable subnet. To make matters more complicated, they are load balanced. Do the client icons need to be changed assuming this is a reasonable idea? I'd hate to reinstall.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TSE4.0/MF1.8--Change IP of Server 1
- Thread starter jc64
- Start date
-
1
- #2
The clients would have to be modified with the new IP addreses if they are in a different subnet. There is ways to script it depending on your setup.
Changing Ip address should not be a problem except with the master browser. I would shutdown both servers and bring up one server at a time to change the IP addresses. You should be OK.
The only time I have ever seen a problem with this is with servers that had Duel NICs enabled. If you don't have Duel NICs "enabled", then your golden.
Dave Namou, MCSE CCEA
Changing Ip address should not be a problem except with the master browser. I would shutdown both servers and bring up one server at a time to change the IP addresses. You should be OK.
The only time I have ever seen a problem with this is with servers that had Duel NICs enabled. If you don't have Duel NICs "enabled", then your golden.
Dave Namou, MCSE CCEA
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question