TS in DMZ not mapping drives

[spazman]

I have a TS in our DMZ, it is a member server. I get all the POlicies to it, except user policies. When I run aa RSOP it tell me there are no user settings, and that all the GPO that were suppoesed to process did.

In my Default Domain Policy (AD 2008) I have mapped drives, these work on every system so far, excpet this one.

I can type net use T: \\server\Share and I get the drive.

The other thing that does not come across are icon I have created in the GPO.

Any ideas?

 

[dberg35]

For starters the GP Default should only be used for password mgt anything else you should create a new one. As for drive mapping you can put a BAT file in SYSVOL and that should work, this is what I use. Also make sure you have licensing to allow for mapping of drives.

 

[acl03]

So there is a firewall between this member server and the domain controller? Is there a DC also in the DMZ?

If you are not getting any user settings, it sounds like there may be a firewall blocking requests between your network and the DMZ.

Can you or your FW manager look for denies when logging in?

Thanks,
Andrew

Hard work often pays off over time, but procrastination pays off right now!

 

[spazman]

Correct Default Domain shoudl only have login. I changed this.

I will check the FW and let you know.