Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trying to select a specific paper bin in post script.

Status
Not open for further replies.

Wyrmboy

Programmer
Mar 13, 2012
2
US
Hello, I am designing a layout in HP extreme dialogue 6.1... it is generating a post script output file. I want to have this output file pull from 3 different paper bins when the job is executed on the printer which in this case is a IKON high volume cut sheet printer. What is the media type within postscript that determines which paper bin the job will pull from?

Thanks in advance.
Wyrm
 
Hi I have the same issue
Ive managed to work out the setpage device command for sub set stapling.

However I need to pull a pre-printed document from a non fuse tray
(interposer) essentially to act as a non fused insert.

This would be a stock pull where the tray is defined with a certain stock loaded.

The ps will need to pull the stock and therefore the tray.

kind regards

steve Dirtyhobbit
 
Cant you just assign a blank page to "print" so when it sees that page it pulls from the bin of preprinted stock?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top