Trying to install digital expansion failed 1

[shgl2005]

Hi,

Our IP Office is running version 9.0.100.845
with DIG DCPx30 V2 installed on it and a bunch of cards

we are trying now to install another digital expansion but it fails to run, from what I see the new expansion has different version 9.0.12 and up, is that causing the issue? and any workaround for this?

Appreciate the help here

 

[sizbut]

Which IP Office mode is your system running. If Basic Edition mode then you may already be at max extensions (48 in 2-digit numbering mode).

Stuck in a never ending cycle of file copying.

 

[shgl2005]

I believe we are running Essential Edition

we have 50+ digital phones and 20 IP Endpoints

 

[budbyrd]

If you bought a new one make sure it isn't a DIG 30 V2B. The B version needs 9.1 or higher.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

 

[shgl2005]

Thank you!

I thought B support 9.0 or higher.

ordered a refurbished unit as it's hard to find any new one, got it yesterday, and works flawlessly!

anyone need a DIG 30 V2B for sale, new condition