Trying to figure out how to adjust time

[phonenoobie]

I've searched the FAQs and this forum, and googled to death, so please forgive the newbie question here.

At work we have three M7208 phones and nothing else. We had a power outage and now the phone times are out by as long as long as the power was out. The only information I've found is to use Feature **23646 which doesn't work on the M7208. The only documentation I can find specific for this model is a User Card which makes no reference to adjusting the time.

Can anyone tell me how to fix the time and also if there is a feature to switch on that would just let the telco set the time automatically?

 

[icstech]

you need a T7316 phone to program
7208 will work on smaller systems 3X8
Try Feature **TIME and use password "BASIC

 

[Johnthephoneguy]

You can also use an older 7310 or 7324

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[cook1082]

6x16 norstar you could also use just 7208's.And depending on the release of S/W and if you get CLID there is an auto time setting that gets the time from the phone co.