We have a database diagram that we printed to 34 x 44 inches - one of the standard page size on plotters. The paper we have is a roll 36 wide. However, when we print it there is a lot of white space below the diagram. On a 36 inch wide paper, the diagram print space is less than 24 inches high and is 44 inches long. If were were able to enlarge by 40 percent, the printing would be the full width of the paper and it would be about 60 inches long.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trying to Enlarge Acrobat Print Job on Large Plotter
- Thread starter alex20850
- Start date
Fist check Page Setup. With your printer selected, choos the correct page size. Then choose any scaling as necessary.
Afer you close the page setup window, hit print. The print window will display a preview on the new page size.
Using OSX 10.3.9 on a G4
Afer you close the page setup window, hit print. The print window will display a preview on the new page size.
Using OSX 10.3.9 on a G4
- Status
Similar threads
