I am trying to connect two different subnets together to share files and network printers. My situation is that I have two ADSL connections of 3 MBs each on Telsey Routers with 4 voice ports each. I have these two Routers and all workstations and printers connected to a D-Link DES-1024D unmanaged switch. My ISP provider sold me a 6 MB connection but when it was installed it was installed as 2 different connections with gateways 192.168.10.1 and 192.168.2.1. So in order to take advantage of the two connections I have configured half of my network on one router and half on the other. Now the question is how do I get all of the devices (they all belong to the same workgroup) to see each other and pass information back and forth. I hope this isn't too much of a newbie question. I have searched and searched on how to connect two routers or two subnets but I can't find anything that applies to my situation.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trying to connect two subnets
- Thread starter wibbster
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question