Trying to add an IP extension

[phonetech1]

Hi All,
I trying to add an IP ext. I am following Alex instructions on adding a generic extension and I am trying to use TRAF and SERV values that my digital stations use in GESPI for CSP=0 and it tells me that service is not in range.
I am new to MD110, so any help would be appreciated.
Yury

 

[rfpui]

Hi
TRAF and SERV for digital and generic extension are different.
Send to forum your digital category and what do you sent with GESPI
And very important BC version.



----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[phonetech1]

BC Ver. is 12. I am not sure how to display more info.
I was trying to send:
TRAF:00050515
SERV:0202120100.

This is the info for our digital phones.
Thanks

 

[rfpui]

Hi
TRAF for digital extension have 8 digits and for generic have 10
SERV for digital ext have 10 digits and generic have 13.

You wrote that you have alex.
Look to alex and find parameter description for GE extension.

If you still have problem I can send difference between GE and KS


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[rfpui]

My little mistake
If You have BC 12 SERW is 12 character long. BC 12.1 = 13 character long.


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[phonetech1]

Thanks, I printed these parameters from Alex and I will try to create a new set of values for GE.
I would appreciate if you send me your information.

ybrodsky@ai-logix.com

Thanks

 

[rfpui]

You have BC 12.1

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[rfpui]

look to Your e-mail

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[phonetech1]

Thanks for all your help. I don't have these phones working yet, but I feel that I am on the right track.