trying put DISA to work 1

[sandrobf]

Hi,

I´m trying to put DISA to work in my BC9.

When I try to initiate the number series using:
NANSI:NUMSE=11600,NUMTYP=DI;

I get the answer:
NOT ACCEPTED
NUMTYP
NOT IN RANGE

What may be the problem?

Thanks in advance!

Sandrobf

 

[rfpui]

Send Your NADAP printout

My be You have 1 as Call pickup code?

 

[SYAR2003]

Post a result of
PCLOP:UNIT=NHHS1;
and
PCLOP:UNIT=NHHS2;

Reason !

Restriction of DISA
For some customers in Sweden the usage of DISA is not allowed and the possibility to define the number series for DISA is then prohibited.


Are you in sweeden ?
....

 

[sandrobf]

rfpui,

Unffortunately, I dont have access to my NADAP now. Tomorrow, I ll send you.
OBS. In fact, the NUMSE I put in the message was just an example. I tried with NUMSE=499. Pickup code is 55.
Extensions (NUMTYP=EX) are from 401 to 459, as i remember.

Anyway, the message doesnt mean that NUMTYP is out of range? In this case, I thought i might not be allowed by some previous configuration or permission. My password is level 5.

Sandrobf.

 

[sandrobf]

SYAR2003.

I´m in Brazil.

I have some friends also in Brazil with BC9 and DISA working but so far they couldn´t give me an answer .

I´ll check PCLOP.

 

[SYAR2003]

Okay !
I think it's closed in NH.

Here's what i want you to do .
Make two SACOP's and post the printout back here .

NR.1
SACOP:LIM=1,UNIT=NHHS1,FILNO=2,POINT=15,RELOFF=0&&1;

NR.2
SACOP:LIM=1,UNIT=NHHS2,FILNO=2,POINT=15,RELOFF=0&&1;

Also make the two PCLOP's .

..Syar

 

[sandrobf]

Here they are:

Any suggestion???


<SACOP:LIM=1,UNIT=NHHS1,FILNO=2,POINT=15,RELOFF=0&&1;
MEMORY CONTENT ON INDIVIDUAL POSITION
EXE A
FILE NUMBER RELOAD FILE START DS FILE START
2 000001B4
POINT RELOFF DSOFF ADDRESS DATA ISO
0015 0000 000001DE 00 .
0015 0001 000001DF 00 .
END

<SACOP:LIM=1,UNIT=NHHS2,FILNO=2,POINT=15,RELOFF=0&&1;
MEMORY CONTENT ON INDIVIDUAL POSITION
EXE A
FILE NUMBER RELOAD FILE START DS FILE START
2 000001B4
POINT RELOFF DSOFF ADDRESS DATA ISO
0015 0000 000001DE 00 .
0015 0001 000001DF 00 .
END

<PCLOP:UNIT=NHHS1;
PATCH LOG DATA

UNIT: NHHS1 LIM: 1
CI TYPE STATUS SIZE IA/SIGNO/ADDR CORRSTART
S62693A REL DATA CONF 34 00000475 00003C28
S62693A REL DATA CONF 34 0000047B 00003C4A
S69450A PROGRAM CONF 34 00001FC2 00003C6C
END

<PCLOP:UNIT=NHHS2;
PATCH LOG DATA

UNIT: NHHS2 LIM: 1
NO CORRECTIONS
END

 

[SYAR2003]

Make another SACOP / PCASP please :
SACOP:LIM=1,UNIT=NHHS1,FILNO=2,POINT=0&&15,RELOFF=0&&1;
and
SACOP:LIM=1,UNIT=NHHS2,FILNO=2,POINT=0&&15,RELOFF=0&&1;
and


Post the prints .

This is BC9 yes ?

Syar

 

[SYAR2003]

Sorry .POINT = 0-1A .

SACOP:LIM=1,UNIT=NHHS1,FILNO=2,POINT=0&&1A,RELOFF=0&&1;

SACOP:LIM=1,UNIT=NHHS2,FILNO=2,POINT=0&&1A,RELOFF=0&&1;

 

[SYAR2003]

Hi Again !

Your Solution is :


SACOS:LIM=1,UNIT=NHHS1,POINT=15,RELOFF=0,DATA=44&49;
Y;
SACOS:LIM=1,UNIT=NHHS2,POINT=15,RELOFF=0,DATA=44&49;
Y;

Best regards
Syar

Post back the outcome will you !

 

[sandrobf]

Thanxs,

Ill try it.

 

[SYAR2003]

Hi sandrobf !
What's the status .
Does the SACOS work or not ?

Regards Syar

 

[sandrobf]

Yes, SYAR.

That was it. Thanks.

I just have to configurate minimum category and it started to work.

I know i´m just starting with MD110. But where did you get these sort of information ;<) It is not from the manual or dynatext, is it?

Thanks again.

Best regards.

Sandrobf

 

[SYAR2003]

No it's not documented .
I have worked with MD110 since 1986 , so call it experience .

Glad it worked .
This is a way that features were berred before
the license files evolved .

Regards Syar

 

[mdfan]

1986 ? Was it with BC2 you started up with ?

 

[SYAR2003]

BC0 hehe .
It was called upa6 .

Syar

 

[mdfan]

Since 1986 , never considered to do something else ......

What was the md110 like those days ...

 

[SYAR2003]

I'm doing much different things thanks.
Not only working with md110 .

A lot of features has come in later time.
But alot has been there since then.


Syar