Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Try Later?

Status
Not open for further replies.

DTone

Vendor
Feb 17, 2003
289
US
OK I have a CICS 4 X 16 w/6.1 software went in turned off system answer and CCR F*831 & F*832 then went in and did a F*833 turned Greeting A to user press show and REC and it comes up and displays TRY LATER. and disconnects. What did I do wrong? Thanks
KDB
 
has anyone used the auto attendant on a CICS, I ried to get them to buy the Call pilot 100 but no luck.
 
Does the pcmcia software card say "SIP" on it. This stands for Standars-Irad enabled-Prompts Enabled. If it doesn't say that then youm cannot record your own prompts.
 
This message I got before (try later) the s/w card was defective and it has to be replaced if you want to use the built in an everything else is working fine except that feature I replace it and it works fine. In the 6.1 s/w not like before all s/w comes with AA program prompts. I hope that helps.

Good Luck!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top