Trunk Transfer from Analog DID to Centrex

[BURLYMAN]

Does anyone know if you can do a trunk transfer from an inbound DID circuit to a centrex circuit? Currently we can transfer calls from one centrex to another but I'm not sure if I can transfer from a DID to one of our centrex lines. Thanks!

 

[merlinman]

It should work, the system shouldn't care what two lines you tie together.

(Which is what a TRUNK to TRUNK Transfer is in this case.)

 

[Pepperz]

You can do a straight trunk to trunk transfer, but a Centrex transfer is not possible. If you are using the Centrex lines to transfer to another Centrex number with a hookflash, tis won't work from a DID call. The volume will most likely be an issue.

Pepperz@charter.net