trunk to trunk

[bitapn]

Hi all.
I have Aa opebscape business x8 and a openscape business x5 which are networked together via ip trunk.
X8 is the master node and X5 is the slave one.they are working fine.
how can the stations of X5 have access to Co trunk of X8 and vice versa ?how can i set the configuration so that the stations which are registered in X5 can dial the X8 trunk code and then dial an External number and vice versa?
Thanks in advance.

 

[xs650]

Do you use a closed numbering plan?
I would program this configuration via LCR.

 

[bitapn]

yes.
I use the close numbering plan .can you guide me for programing the LCR?
do I need any other configuration?

 

[xs650]

Try this example:
When I dial 0 I want to breakout in my own node and when all channels are used or blocked
in the other node.

Dial Plan: OCZ

Routing Table:
Index 1: Route:ISDN Dial Rule:ISDN (Index 1 is for local breakout)
Index 2: Route: Networking; Dial Rule:Networking Call; Dedicated Gateway:forced; GW Node ID: ID of the other node

Dial Rule:Gateway Call: E1A

 

[donb01]

I don't know that system, but if it uses COS for the trunks, and there is a TTT option in there I would think you might need to have that selected as well.

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA