Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

trunk-to-trunk transfers

Status
Not open for further replies.

coniglio

Technical User
Jun 17, 2003
1,886
US
i have 2616 ports configured for my octel voicemail integration with my PBX. Apparently the voicemail networking is not working properly at one of my remote locatoins and i've been instructed to make sure trunk-to-trunk transferring is not blocked. Needless to say, I don't know how to check this. My remote site should be able to network messages with my local site. All thirteen offices work except one, and that is the one i am supposed to check the trunk-to-trunk transfer. Thank you!!
 
EXTT IN THE CDB SHOULD BE SET TO NO, YOU WILL FIND IT UNDER NET DATA

OLD ROLMEN WORKING ON NORTELS
 
Simply try to transfer an incoming trunk call to the destination using the trunk. If you can transfer successfully then your trunk-to-trunk transfer is working.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top