here is the scenerio, we have Cisco sets that are connected by a PRI to our OPT 61, I can get an inbound call transferred from a digital set over the PRI to cisco, but not the console. All I did to make the sets work is FTTU in CLS, but not sure how to make it work for the console.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
trunk to trunk transfer on m2250
- Thread starter wacker43
- Start date
Firebird Scrambler
Systems Engineer
Have you tried using the PRI's ACOD folowed by the extension number when transferring a call over the link?.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question
- Locked
- Question