i don't work with nec systems enough to know the answer to this one off the top of my head. have a customer who wants to be able to transfer an incoming call back out to an external location. is this possible with the system listed above?
Good luck: (call your local NEC tech - don't try this)
3-04 TRUNK TO TRUNK YES/NO PER TRUNK.
1-8-07 AND 1-8-08 CLASS FLAGGED TO ALLOW TRUKNK TO TRUNK/STATION TO TRUNK.
4-17 STATION TO CLASS ASSIGNMENT.
1-4-00 TIMER TO DISCONNECT TANDAM CONNECTION.
1-8-07 REQUIRES THIS TABLE:
Corresponding
CO/PBX Line Key
Function Name
Default
Class 00
Default
Class 01 ~ 15
Page 01
LK1
Night Mode Switching (System-Wide)
Allow
Deny
LK2
Night Mode Switching (Tenant)
Allow
Deny
LK3
System Speed Dial Programming
Allow
Deny
LK4
Not Used
N/A
N/A
LK5
Not Used
N/A
N/A
LK6
Not Used
N/A
N/A
LK7
Automatic Trunk-to-Trunk Transfer (Set/Reset) and programming of Outgoing Numbers
Allow
Deny
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.