Trunk SIP

[FlavioMiranda]

Hi all,

I´m trying interconnect an Asterisk with PABX (NEC NEAX 2000 IPS) through of SIP trunk,but , I´m a beginner in Asterisk.
How to configure a trunk sip in Asterisk?
how to assign E.164 Address for the SIP trunk?
thanks!

 

[busster]

Peer Details:
allow=ulaw&gsm
canreinvite=no
host=192.10.1.253&dynamic
insecure=very
qualify=500
secret=password for extension on other server
type=peer
username=extension on other server



User Details:

allow=ulaw&gsm
canreinvite=no
dtmfmode=rfc2833
insecure=very
qualify=500
secret= password for extension on other server
type=user
username= extension on other server

Register String:
220:12345@192.10.1.253/254368


I am not sure what you mean by e.164 adress on this sip trunk as it is internal between the two machines. Internally you would direct dial patterns between the two machines based on what was dialed by the end user.

 

[FlavioMiranda]

Hi busster,

I have some doubts!

Here you set up an trunk?
Peer Details:
allow=ulaw&gsm
canreinvite=no
host=192.10.1.253&dynamic

(This is a Asterisk IP?)

insecure=very
qualify=500
secret=password for extension on other server

type=peer
username=extension on other server



User Details:
This is an station of the asterisk or pabx?

allow=ulaw&gsm
canreinvite=no
dtmfmode=rfc2833
insecure=very
qualify=500
secret= password for extension on other server
type=user
username= extension on other server

Register String:
220:12345@192.10.1.253/254368

Thank you very much and sorry for my bad english!