trunk problem

[memo86]

i have 8206zl with two 24-Port Mini-GBIC Module nd on port a1 a3 a5 nd b1 b3 b5 i have Gigabit 1000Base-T mini-GBIC nd configure a1 nd b1 as trunk static nd the same with a3 nd b3 nd a5 nd b5 when i connect 2610 via port 25 nd 26 to any of them no problem but when i connect another device utm sonicwall every thing down but when i connect it via single port it work good although i config sonicwall x0 nd x1 to be trunk don't know why this happen .
when i open syslog i found b3 clocked with stp when i connect sonicwall to port a3 nd b3 nd the work as a trunk i'm using rstp on my network

another thing Server-to-Switch Trunking in Procurve switch how this work or how i configure it or just config atrunk on my core nd on other side teaming on server side

 

[VinceWhirlwind]

Have you configured the trunk ports as "LACP" trunk ports?

 

[memo86]

i config it as trunk static not lacp ... i thought this the problem i need to config it as lacp coz trunk work only with hp procure write ???

 

[VinceWhirlwind]

Yes, that's right.

 

[jkupski]

The above post brought to you by icanhascheezburger.com