Trunk Members out-of-service

[gbanke]

I'm working on a pilot project to get our internal voice traffic moving across our private ATM network. I've installed a TN767E, setup a trunk group with 10 members following Cisco's configuration documentation to the letter. I found information on this forum on how to pinout a Cat 5 from my 66 block to the VWIC on our Cisco router. The connection turns the led 'green' on the router and my router tech can see the interface is up. However, when I status the trunk group all members are out-of-service. I'm scratching my head here. Does anybody here in Avaya land have a clue what I'm missing??

TIA - Gary <><

 

[RTMCKEE]

could be the clock, is the cisco providing the clock? Usually when you set up t-1s from the telco you have them provide the clock. Also are you sure you have the framing correct? b8zs, esf, those settings?

RTMCKEE