trunk line busy

[ericssonpro]

I have 2 trunk lines that r busy, dont know how they got conected tp each other tried everything to free them but nothing worked did RFBOI trying to block the BLEQI but i couldnt any one any ides how to fix it? but most important how this can happen?
<CTCOP:BPOS=1-1-32;
CALL TRACE
FROM-CON EQU/IP-ADDR L>GS-EQU GS>L-EQU TO-CON EQU/IP-ADDR
TL11 001-1-32-00 001-0-00-30 002-0-00-30 EL6 36835 002-2-70-07
TL11 001-1-32-01 * NO-CON *
TL11 001-1-32-02 001-1-00-08 002-1-00-08 TL11 002-1-30-01
TL11 001-1-32-03 * NO-CON *
END
0625 9559 DO 18 4742957 36391 002001006
0626 9559 D 18 4742957 36391 002002002

 

[megglesfield]

Use RFPUI:UNIT=TLP11,LIM=1; This will release the connections. This kind of trunk can get locked up if there is no clear down signal. On this type of trunk an answer signal or a clear down is indicated by a polarity reversal. You may or may not be getting these signals or your route may be configured incorrectly.

 

[ericssonpro]

Thanks i fixed by BLDBI for both trunks then RFBOI for both trunks that worked but only if u block both boards at the same time and the RFBOI both of them then BLDBE, thank you for your help Megglesfield.

 

[corch]

But if you have in D3 of sig that you have clear by reversal polarity,and the external line give you it, ¿Why is it still in the same problem?