Trunk IP to Cisco 3

[alapi]

Hi,

I want connect MD110 BC12 SP7 with CISCO 3300 Version 12.3 by trunk ip.

I have configured the route and destination as:

<ROCAP:ROU=ALL;
ROUTE CATEGORY DATA
ROU SEL              TRM SERV       NODG DIST DISL TRAF     SIG          BCAP
45  7110000000000010 5   3110000000  0   30   128  03151515 011100000091 000100

END

 
<RODAP:ROU=ALL;ROUTE DATA
ROU   TYPE  VARC        VARI        VARO        FILTER  
45    TL65  H'00000111  H'00000011  H'00000000  NO

END

<RIANP:ROU=ALL;
H.323 ROUTE DATA
ROU   GRP   IP ADDRESS       LROUID           RROUID           CODECS       
45    1                                                        B0123456789AC

END

<RODDP:DEST=ALL,IPOPT=YES;
EXTERNAL DESTINATION ROUTE DATA
DEST  DRN ROU CHO CUST IP ADDRESS       RROUID         
44        45           10.0.0.1       

END

I can call from Cisco to MD110, but I can`t call from MD110 to Cisco.

I've done a trace and I can see that cisco doesn`t answer anything to MD110.

09.16.59.960 00001 SWHW  SIGNAL                H2250SWREFEXG     (H'0021)
               FROM   TLP65   (H'03BE) EXE A IN LIM 001
               TO     EQU NO      1-0-20-00
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'FF H'FF H'00 H'3A H'02 H'02 H'8D H'36 H'02 H'00
               010   H'8B H'F6
09.17.00.020 00002 HWSW  SIGNAL                H2250FWREFEXG     (H'0002)
               FROM   EQU NO      1-0-20-00
               TO     TLP65   (H'03BE) EXE A IN LIM 001
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'01 H'00 H'00 H'09 H'00 H'3A H'00 H'00 H'00 H'00
               010   H'00 H'00 H'00 H'00
09.17.00.120 00003 SWHW  SIGNAL                H245OPNREQ        (H'0026)
               FROM   TLP65   (H'03BE) EXE A IN LIM 001
               TO     EQU NO      1-0-20-00
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'00 H'09 H'00 H'3A H'00 H'00 H'00 H'00 H'C5 H'96
               010   H'02 H'02 H'8E H'92 H'02 H'03 H'F9 H'CE
09.17.00.120 00004 SWHW  SIGNAL                H2250DLR          (H'0022)
               FROM   TLP65   (H'03BE) EXE A IN LIM 001
               TO     EQU NO      1-0-20-00
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'00 H'09 H'00 H'3A H'05 H'00 H'00 H'02 H'01 H'04
               010   H'30 H'11 H'03 H'00 H'04 H'34 H'31 H'32 H'30 H'FF
               020   H'08 H'09 H'0A H'0B H'0C H'0D H'0E H'0F H'47 H'37
               030   H'10 H'00 H'87 H'93 H'03 H'2B H'05 H'06 H'07 H'08
               040   H'09 H'0A H'0B H'0C H'0D H'0E H'0F H'38 H'01 H'00
               050   H'39 H'01 H'1E H'3A H'09 H'00 H'00 H'0A H'00 H'00
               060   H'95 H'C5 H'96 H'00 H'3B H'01 H'1A H'45 H'09 H'00
               070   H'00 H'0A H'00 H'00 H'01 H'06 H'B8 H'00 H'4A H'01
               080   H'00 H'54 H'01 H'01 H'55 H'10 H'00 H'00 H'0A H'00
               090   H'00 H'00 H'C0 H'C7 H'42 H'31 H'99 H'D2 H'11 H'8A
               100   H'00 H'D5 H'57 H'01 H'00 H'0A H'08 H'0B H'00 H'04
               110   H'34 H'31 H'32 H'30 H'01 H'0C H'08 H'0B H'00 H'04
               120   H'34 H'34 H'35 H'30 H'01 H'18 H'01 H'01 H'58 H'09
               130   H'2B H'0C H'02 H'88 H'59 H'00 H'01 H'05 H'00 H'59
               140   H'47 H'08 H'02 H'00 H'3C H'05 H'A1 H'04 H'03 H'80
               150   H'90 H'A3 H'18 H'03 H'A9 H'83 H'84 H'1C H'1E H'9F
               160   H'AA H'06 H'80 H'01 H'00 H'82 H'01 H'00 H'8B H'01
               170   H'00 H'A1 H'10 H'02 H'01 H'01 H'02 H'01 H'55 H'30
               180   H'08 H'82 H'03 H'01 H'B8 H'50 H'86 H'01 H'01 H'1E
               190   H'02 H'81 H'83 H'6C H'06 H'01 H'81 H'34 H'31 H'32
               200   H'30 H'70 H'05 H'81 H'34 H'34 H'35 H'30 H'9C H'31
               210   H'01 H'80 H'02 H'02 H'8C H'FA H'02 H'03 H'42 H'40

 

>>>>
Outgoing Message: SETUP

 

      FW Reference : 00 09
      SW Reference : 00 3A


      BEARERCAPABILITY IE:
      cmInformationTransferCap: Unrestriced


      CMPARAM SOURCE ADDRESS IE :
      cmAliasType: E164
      4120


      CMPARAM CID IE:
      00 87 93 03 2B 05 06 07 08 09 0A 0B 0C 0D 0E 0F 


      CMPARAM CONFERENCE GOAL IE:
      cmConferenceGoalType : Create


      CMPARAM CALL TYPE IE:
      cmCallType : P2P


      CMPARAM SETUP H245 ADDRESS IE:
      IP Address : 10.0.0.149
      Port Number : 50582
      cmTransportType: IP


      CMPARAM DESTINATION INFO IE:
      cmEndpointType: Terminal


      CMPARAM DESTINATION IP ADDRESS IE:
      IP Address : 10.0.0.1
      Port Number : 1720
      cmTransportType: IP


      CMPARAM ESTABLISH 245 IE:
      Boolean Value : False


      CMPARAM EARLY 245 IE:
      Boolean Value : True


      CMPARAM CALL ID IE:
      00 00 0A 00 00 00 C0 C7 42 31 99 D2 11 8A 00 D5 


      CMPARAMCANOVERLAPSENDING IE:
      Boolean Value : False


      CALLING PARTY NUMBER IE:
      cmAliasType: Error
      4120


      CALLED PARTY NUMBER IE:
      cmAliasType: Error
      4450


      CMPARAMSENDINGCOMPLETE IE:


      Non Standard Parameter IE : QSIG MESSAGE IE 
      Q.931 Embedded Message  :  SETUP
      Call Reference  :  00 3C (CR Flag is Not Set)
      Q.931 user-network call control protocol
      
      SENDING COMPLETE IE:
      
      BEARER CAPABILITY IE:
      Coding Standard: CCITT standardized
      Information Transfer Capability: Speech
      Transfer Mode: Circuit-mode / Call independent signalling connection
      Information Transfer Rate/Circuit Mode: 64 kbit/s
      Layer 1 Protocol Identification: User information layer 1 protocol
      Recommendation G.711 A-law
      
      CHANNEL ID IE:
      Interface Identifier Present: Interface implicitly identified; the interface which includes the D-channel carrying this information element is indicated.
      Interface Type: Primary rate interface
      Preferred/Exclusive: Exclusive; only the indicated channel is acceptable
      D-channel Indicator: The channel identified is not the D-channel
      Information Channel Selection/Primary Interface: As in following octets
      Coding Standard: CCITT standard
      Number: Channel is indicated by the number in the following octet
      Channel Type: B-channel units
      Channel number: 4
      
      FACILITY IE:
      Type of Protocol: ISO
      Network Facility Extension
      Source Entity: (0) End PINX
      Destination Entity: (0) End PINX
      Interpretation APDU: (0) Discard any unrecognized Invoke PDU
      Type of component: Invoke PDU
      Invoke ID: 1 (H0001)
      Type of Service: Cmn information
      Feature ID List: (101110000101000)
         Call Forwarding rerouting supported
         CCBS possible
         CCNR possible
         Call Offer supported
         AOC interim charge at gateway PINX
         Path Replacement supported at cooperating PINX
      Party category: (1) extension
      
      PROGRESS INDICATOR IE:
      Coding Standard: CCITT standard
      Location: Local private network e.g., PBX
      Progress Description: Originating address is non-ISDN
      
      CALLING PARTY IE:
      Type of Number: Unknown
      Numbering Plan Identification: ISDN numbering plan
      Presentation Indicator: Presentation Allowed
      Spare, reserved
      Screening Indicator: User provided, verified and passed
      Calling Party Number: 4120
      
      CALLED PARTY IE:
      Type of Number: Unknown
      Numbering Plan Identification: ISDN numbering plan
      Called Number: 4450
      Locking Shift to codeset 4
      
      TRANSIT COUNTER (CODESET 5) IE:
      Transit Count: 0


<<<<

09.17.00.640 00005 SWHW  SIGNAL                BORDID            (H'0016)
               FROM   DCP     (H'007E) EXE A IN LIM 001
               TO     EQU NO      1-0-20-00
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'02 H'01 H'23 H'E6 H'00 H'00 H'00 H'00
09.17.00.660 00006 HWSW  SIGNAL                IDENTY            (H'0016)
               FROM   EQU NO      1-0-20-00
               TO     TLP65   (H'03BE) EXE A IN LIM 001
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'01 H'00 H'72 H'CF H'0E H'02 H'18 H'15 H'00 H'00
               010   H'00 H'00 H'00 H'00 H'00 H'00
09.17.04.140 00007 SWHW  SIGNAL                H2250DLR          (H'0022)
               FROM   TLP65   (H'03BE) EXE A IN LIM 001
               TO     EQU NO      1-0-20-00
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'00 H'09 H'00 H'3A H'5A H'00 H'00 H'03 H'02 H'80
               010   H'9F H'08 H'01 H'00 H'55 H'10 H'00 H'00 H'0A H'00
               020   H'00 H'00 H'C0 H'C7 H'42 H'31 H'99 H'D2 H'11 H'8A
               030   H'00 H'D5 H'02 H'02 H'8C H'FA H'02 H'03 H'3F H'48

 

>>>>
Outgoing Message: RELEASE COMPLETE

 

      FW Reference : 00 09
      SW Reference : 00 3A


      CAUSE IE:
      Insufficient number of octets 


      DISPLAY IE:


      CMPARAM CALL ID IE:
      00 00 0A 00 00 00 C0 C7 42 31 99 D2 11 8A 00 D5 


<<<<

09.17.14.000 00008 SWHW  SIGNAL                BORDID            (H'0016)
               FROM   DCP     (H'007E) EXE A IN LIM 001
               TO     EQU NO      1-0-20-00
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'02 H'01 H'23 H'E6 H'00 H'00 H'00 H'00
09.17.14.020 00009 HWSW  SIGNAL                IDENTY            (H'0016)
               FROM   EQU NO      1-0-20-00
               TO     TLP65   (H'03BE) EXE A IN LIM 001
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'01 H'00 H'72 H'CF H'0E H'02 H'18 H'15 H'00 H'00
               010   H'00 H'00 H'00 H'00 H'00 H'00
END

I get in Cisco a single error:

Oct 28 11:11:59.184: //-1/xxxxxxxxxxxx/H323/cch323_h225_receiver: Parse error 16

I have seen that CISCO sends to MD110 a SETUP smaller than MD110 to Cisco:

08.24.05.140 00005 HWSW  SIGNAL                H2250DLI          (H'0003)
               FROM   EQU NO      1-0-20-00
               TO     TLP65   (H'03BE) EXE A IN LIM 001
               WITH     0    1    2    3    4    5    6    7    8    9
               000   H'01 H'00 H'00 H'09 H'00 H'0A H'05 H'00 H'00 H'02
               010   H'01 H'03 H'08 H'09 H'57 H'69 H'72 H'65 H'6C H'65
               020   H'73 H'73 H'00 H'0A H'11 H'0B H'00 H'04 H'34 H'34
               030   H'34 H'30 H'00 H'00 H'00 H'80 H'08 H'00 H'00 H'00
               040   H'00 H'00 H'0C H'11 H'0B H'00 H'04 H'34 H'31 H'32
               050   H'30 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
               060   H'00 H'31 H'01 H'1B H'34 H'09 H'00 H'00 H'0A H'00
               070   H'00 H'01 H'2B H'05 H'00 H'37 H'10 H'59 H'0C H'6D
               080   H'96 H'46 H'B2 H'11 H'DA H'80 H'20 H'DF H'CA H'13
               090   H'41 H'2E H'BB H'38 H'01 H'00 H'39 H'01 H'1E H'3B
               100   H'01 H'1A H'45 H'09 H'00 H'00 H'0A H'00 H'00 H'95
               110   H'06 H'B8 H'00 H'4A H'01 H'00 H'54 H'01 H'01 H'55
               120   H'10 H'59 H'0C H'6D H'96 H'46 H'B2 H'11 H'DA H'80
               130   H'22 H'DF H'CA H'13 H'41 H'2E H'BB H'47 H'04 H'00
               140   H'00 H'80 H'0A H'57 H'01 H'00 H'00 H'00 H'00 H'00
               150   H'00 H'00 H'00 H'00

 

>>>>
Incoming Message: SETUP

 

      FW Reference : 00 09
      SW Reference : 00 0A


      BEARERCAPABILITY IE:
      cmInformationTransferCap: Speech


      DISPLAY IE:
      Wireless


      CALLING PARTY NUMBER IE:
      cmAliasType: Error
      4440


      CALLED PARTY NUMBER IE:
      cmAliasType: Error
      4120


      CMPARAM SOURCE INFO IE:
      cmEndpointType: Gateway


      CMPARAM SRC CALL SIGNAL ADDRESS IE:
      IP Address : 10.0.0.1
      Port Number : 11013
      cmTransportType: IP


      CMPARAM CID IE:
      59 0C 6D 96 46 B2 11 DA 80 20 DF CA 13 41 2E BB 


      CMPARAM CONFERENCE GOAL IE:
      cmConferenceGoalType : Create


      CMPARAM CALL TYPE IE:
      cmCallType : P2P


      CMPARAM DESTINATION INFO IE:
      cmEndpointType: Terminal


      CMPARAM DESTINATION IP ADDRESS IE:
      IP Address : 10.0.0.149
      Port Number : 1720
      cmTransportType: IP


      CMPARAM ESTABLISH 245 IE:
      Boolean Value : False


      CMPARAM EARLY 245 IE:
      Boolean Value : True


      CMPARAM CALL ID IE:
      59 0C 6D 96 46 B2 11 DA 80 22 DF CA 13 41 2E BB 


      CMPARAMCALLREFERENCEVALUE IE:
      Integer Value : 32778


      CMPARAMCANOVERLAPSENDING IE:
      Boolean Value : False

Can anybody help me ?

Thanks.

JI

 

[rfpui]

How look RODDP:dest=44;
Are You traied call 4450 from extesion 4120?

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[alapi]

Hi,

Ok, I forgot the print:

<RODDP:DEST=44;
EXTERNAL DESTINATION ROUTE DATA
DEST  DRN ROU CHO CUST ADC                        TRC SRT NUMACK PRE
44        45           1005000000000250100000000  0   1   0                     

END

I have tested with ADC=1005000000000250100000000, and
with ADC=1005000000000250000000000.

Yes, I have tried call 4450 from 4120.

Thanks.

JI

 

[rfpui]

try ACD=0606100000000250006000000
or ACD=1606100000000250006000000

and how look
NADAP:numtyp=nl;

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[alapi]

Hi,

I've defined this number length:

NANLS:EXL=44,MIN=4,MAX=4;

I've changed the ADC of RODDI to 1606100000000250006000000, and I test to call 4450 and I get the same error.

I show debug on CISCO:

  Q931 Message IE Decodes
Protocol Discriminator : 0x08
CRV Length             : 2
CRV Value              : 0x109B
Message Type           : 0x05: SETUP
 Single-byte IE : A0 (Sending Complete)
 Bearer Capability: Length Of IE=3
 Data 8890A5
 Calling Party Number: Length Of IE=5
 Data 8134313230
 Called Party Number: Length Of IE=5
 Data C934343430
 User-User: Length Of IE=225
 Data 0520E0060008914A0002000A000095C85C0101807453020080C3C90106
05060708090A0B0C0D0E0F00450C07000A000095042C110000000A0000
00C0C7423199D2118E061D0100010006A0010080920100092B0C028859
0001050080840802008605A104038090A31803A9838B1C1E9FAA068001
008201008B0100A1100201010201553008820301B8508601011C1D9FAA
068001008201008B0100A10F02010202010080074942414E455A201E02
81836C060181343132307005C9343434307E1C00FE550100590100B00C
064981343132300F098186804942414E455A9C310180
[b]Oct 28 15:40:49.528: //-1/xxxxxxxxxxxx/H323/cch323_h225_receiver: Parse error 16[/b]
  Q931 Message IE Decodes
Protocol Discriminator : 0x08
CRV Length             : 2
CRV Value              : 0x109B
Message Type           : 0x5A: RELEASE_COMP
 Cause: Length Of IE=2
 Data 809F
 User-User: Length Of IE=33
 Data 052580060008914A000201110000000A000000C0C7423199D2118E061D06800100
Oct 28 15:40:53.384: //-1/xxxxxxxxxxxx/H323/cch323_h225_receiver: Parse error RXDATA_NONE
ITS#

Thanks.

JI

 

[whosrdaddy]

I dont think IP trunking will work with any other vendor?!

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[TripleT]

Alapi,

Try changing the last bit of SIG to a 0.

It looks as though the CISCO does not like the QSig Info or the Channel ID.

 

[alapi]

Hi,

Thank very much TripleT, now it works fine.

I show all MD110 configuration, I hope it can help someone.

RINIP:LIM=ALL;
IP NETWORK INTERFACE DATA
BPOS       GRP   IP ADDRESS        MASK              ROUTER            ETHCNF
  1-0-20   1     10.0.0.149        255.255.255.0     10.0.0.246        0
END

<RODAP:ROU=ALL;
ROUTE DATA
ROU   TYPE  VARC        VARI        VARO        FILTER  
45    TL65  H'00000111  H'00000011  H'00000000  NO
END
 
<ROCAP:ROU=ALL;ROUTE CATEGORY DATA
ROU SEL              TRM SERV       NODG DIST DISL TRAF     SIG          BCAP
45  7110000000000010 5   3110000000  0   30   128  03151515 011100000090 000100
END
 
<RIANP:ROU=ALL;H.323 ROUTE DATA
ROU   GRP   IP ADDRESS       LROUID           RROUID           CODECS       
45    1                                                        B0123456789AC
END
 
<RODDP:DEST=ALL,IPOPT=YES;EXTERNAL DESTINATION ROUTE DATA
DEST  DRN ROU CHO CUST IP ADDRESS       RROUID         
44        45           10.0.0.1       
END

 
<RODDP:DEST=ALL;EXTERNAL DESTINATION ROUTE DATA
DEST  DRN ROU CHO CUST ADC                        TRC SRT NUMACK PRE
44        45           1005000000000250000000000  0   1   0                     
END

And I show all CISCO configuration.

show run
Building configuration...

Current configuration : 16698 bytes
!
! Last configuration change at 20:12:27 GMT+1 Fri Oct 28 2005
! NVRAM config last updated at 20:09:38 GMT+1 Sat Oct 29 2005
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ITS
!
boot-start-marker
boot-end-marker
!
logging buffered 256000 debugging
no logging console
enable password cisco
!
username all
username cisco password 0 cisco
clock timezone GMT+1 1
clock summer-time GMT+1 recurring last Sun Mar 2:00 last Sun Oct 3:00
no aaa new-model
ip subnet-zero
!
!
ip cef
ip ftp source-interface Ethernet0/0
ip domain lookup source-interface Ethernet0/0
ip name-server 10.0.0.180
ip dhcp excluded-address 10.0.0.1 10.0.0.150
ip dhcp excluded-address 10.0.0.180 10.0.0.255
!
!
ip multicast auto-enable
isdn switch-type basic-net3
carrier-id Source
!
!
voice call convert-discpi-to-prog
voice call carrier capacity active
voice rtp send-recv
!
voice service pots 
!
voice service voip 
 signaling forward unconditional
 h323
  h450 h450-2 timeout T1 1000
  h225 signal overlap
  h225 h245-address on-connect
  call start slow
  bearercap-ie signaling-only standard
  h245 caps suppress nte
!
!
voice class codec 99
 codec preference 1 g711alaw
 codec preference 2 g729br8
 codec preference 4 g728
 codec preference 5 clear-channel
!
voice class codec 100
 codec preference 1 g711alaw
!
voice class codec 10
 codec preference 1 g711alaw bytes 240
!
!
!
voice class h323 1000
  call start slow
 
!
!
!
!
!
!
dial-control-mib retain-timer 43200
dial-control-mib max-size 500
!
!
class-map match-any AutoQoS-VoIP-Remark
 match ip dscp ef 
 match ip dscp cs3 
 match ip dscp af31 
class-map match-any AutoQoS-VoIP-Control-UnTrust
 match access-group name AutoQoS-VoIP-Control
class-map match-any AutoQoS-VoIP-RTP-UnTrust
 match protocol rtp audio 
 match access-group name AutoQoS-VoIP-RTCP
!
!
policy-map AutoQoS-Policy-UnTrust
 class AutoQoS-VoIP-RTP-UnTrust
  priority percent 70
  set dscp ef
 class AutoQoS-VoIP-Control-UnTrust
  bandwidth percent 5
  set dscp af31
 class AutoQoS-VoIP-Remark
  set dscp default
 class class-default
  fair-queue
!
gw-accounting syslog
!
!
!
!
!
!
interface BRI1/0
 description conectado a MD110
 no ip address
 isdn switch-type basic-net3
 isdn overlap-receiving
 isdn incoming-voice voice
!
interface BRI1/1
 description conectado a BP250
 no ip address
 isdn switch-type basic-net3
 isdn overlap-receiving
 isdn incoming-voice voice
!
ip http server
ip http path flash:
ip classless
ip route 0.0.0.0 0.0.0.0 10.0.0.246
!
!
!
ip access-list extended AutoQoS-VoIP-Control
 permit tcp any any eq 1720
 permit tcp any any range 11000 11999
 permit udp any any eq 2427
 permit tcp any any eq 2428
 permit tcp any any range 2000 2002
 permit udp any any eq 1719
 permit udp any any eq 5060
ip access-list extended AutoQoS-VoIP-RTCP
 permit udp any any range 16384 32767
logging 192.168.0.1
logging 10.0.0.111
logging 10.0.0.61
snmp-server community public RO
snmp-server enable traps tty
cdp timer 254
cdp holdtime 200
!
tftp-server flash:P00303020214.bin
tftp-server flash:P00403020214.bin
tftp-server flash:S00103020002.bin
tftp-server flash:ata18x-v2-16-ms-030327b.zup
tftp-server flash:cmterm_7920.3.3-01-02-021.bin
tftp-server flash:its-CISCO.2.0.1.0.tcl
tftp-server flash:CP79050101SCCP030530B31.zup
tftp-server flash:CP7912010200SCCP031023A.sbin
tftp-server flash:P00305000301.sbn
tftp-server flash:RingList.xml
tftp-server flash:3s-hello.raw
tftp-server flash:24ctu.raw
tftp-server flash:pepetellaman.pcm
!
control-plane
!
rmon event 33333 log trap AutoQoS description "AutoQoS SNMP traps for Voice Drops" owner AutoQoS
rmon alarm 33333 cbQosCMDropBitRate.1081.1083 30 absolute rising-threshold 1 33333 falling-threshold 0 owner AutoQoS
!
call application voice autoa flash:its-CISCO.2.0.1.0.tcl
call application voice autoa operator 4460
call application voice autoa redirect-number 4460
call application voice autoa language 0 ES
!
!
voice-port 1/0/0
 compand-type a-law
 cptone ES
 bearer-cap Speech
!
voice-port 1/0/1
 compand-type a-law
 cptone ES
 bearer-cap Speech
!
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
!
!
!
!
!
dial-peer voice 4120 voip
 destination-pattern 41..
 voice-class codec 10
 voice-class h323 1000
 session target ipv4:10.0.0.149
 dtmf-relay h245-signal
 carrier-id source md110
!
!
!
telephony-service
 load 7910 P00303020214
 load 7960-7940 S00103020002
 load 7914 S00103020002
 load ATA ata18x-v2-16-ms-030327b.zup
 load 7905 CP79050101SCCP030530B31.zup
 load 7920 ata18x-v2-16-ms-030327b.zup
 load 7912 CP7912010200SCCP031023A.sbin
 max-ephones 48
 max-dn 80
 ip source-address 10.0.0.1 port 2000
 auto assign 48 to 60
 system message ITS VoIp
 url services [URL unfurl="true"]http://10.0.0.98/CiscoIPServices/calendar/cal.asp[/URL]
 user-locale ES
 network-locale ES
 create cnf-files version-stamp 7960 Feb 10 2005 19:50:23
 keepalive 45
 voicemail 9999
 max-conferences 6
 moh music-on-hold.au
 time-format 24
 date-format dd-mm-yy
 web admin system name cisco password cisco
 dn-webedit 
 time-webedit 
 transfer-system full-consult
 transfer-pattern 000.
 transfer-pattern 0.........
 transfer-pattern ..........
 transfer-pattern 6........
 transfer-pattern 2..
 transfer-pattern 44..
 transfer-pattern 12..
 transfer-pattern 9........
 transfer-pattern 52...
 secondary-dialtone 0
!
!
!
!
!
line con 0
 exec-timeout 0 0
 password cisco
 login
line aux 0
line vty 0 4
 password cisco
 login
line vty 5 15
 password cisco
 login
!
ntp clock-period 17179700
ntp server 10.0.0.9
ntp server 213.98.118.5
!
end

ITS#

Thank for all.

JI