Trunk access restriction

[notapropergeordie]

Hi all,
I have a Video conference server connected on 2 TIEs to M1 (25.40)
I need to restrict outgoing Video conf calls to one PRI(from M1 to carrier), currently using a 2 PRI route in common with all other o/g calls.
I plan to create new route and delete then recreate the 30 channels in the new rte.
Then insert digits on the Polycom route to steer those calls to the new route using TSC. Am I right or should I use the dreaded TARGs, (will need help with that).
Anything else I should consider?
Much Appreciated
Martin

 

[PERRYPJ]

YOU COULD BYPASS BARS, SET THE TGAR AND TARG TO 0 THEN IN THE CLS SET IT TO UNR. THEN JUST DIAL THE ACOD

OLD ROLMEN WORKING ON NORTELS

 

[notapropergeordie]

Sounds good! Can I insert the required ACOD on the incoming calls from the Polycom route?