Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TRREP Command on MD110
- Thread starter lobezno
- Start date
it depends on what you want to measure on .
Is it incoming trunks , e.g all trunks in one route.
Then you have to start a measurement with:
TRROI:ROU=X,DATE=2003-10-14&&2003-12-31,TIMEI=00-00,TIMEE=24-00;
And read it with TRREP:MENO=X,DATE= ,PERIOD=2;
meno equals the number you are given when entering TRROI.
( Note! it has to be BC6 or newer , for storage on HDU ,
if older systems you have to mount an extra device for traffic recording , or you will have to print out data each day before midnight , or some times also before 16:00.This is the time periods that MD110 clears the collected data in memory and dumps it to external storage).
//Soaplover
Is it incoming trunks , e.g all trunks in one route.
Then you have to start a measurement with:
TRROI:ROU=X,DATE=2003-10-14&&2003-12-31,TIMEI=00-00,TIMEE=24-00;
And read it with TRREP:MENO=X,DATE= ,PERIOD=2;
meno equals the number you are given when entering TRROI.
( Note! it has to be BC6 or newer , for storage on HDU ,
if older systems you have to mount an extra device for traffic recording , or you will have to print out data each day before midnight , or some times also before 16:00.This is the time periods that MD110 clears the collected data in memory and dumps it to external storage).
//Soaplover
- Status
