Troubleshooting Dialing Translations 1

[Midstream]

I'm new to Cisco and have a CUCM-6 tied to an Avaya CM4 via H.323 trunks. I'm attempting to get the Avaya across the trunk group to the Cisco and out the PSTN. When things go wrong in the Avaya, I put a software trace on an object, dial a number and watch the fun, real-time. Is there anything like this on my CUCM that I'm not finding?

list trace tac 710 Page 1

LIST TRACE

time data

14:20:44 dial 918002422121 routeREFIX|FNPA|ARS
14:20:44 route-pattern 1 preference 1 cid 0x1e1
14:20:44 seize trunk-group 10 member 13 cid 0x1e1
14:20:44 Setup digits 8002422121
14:20:44 Calling Number & Name 763XXXXXXX Ned Cedrick
14:20:44 denial event 1166: Unassigned number D1=0x8c9d D2=0x240101
14:20:44 idle trunk-group 10 member 13 cid 0x1e1

I know this isn't working because I don't have the 1 in front and that's a quick change. I'm looking for the tool on the Cisco side that would emulate this functionality, please.

 

[whykap]

unfortunately since there is on h323 gateway involved on the cisco side there is no real time traces. In your case you will need to enable the correct traces on the call manager side and pull them after the fact using the RealTimeMonitoringTool (RTMT).
You will need to read up on the traces collection and also RTMT guide to understand what you need to do.

 

[Midstream]

Sweet! I found it in the Plugins, downloaded it and I'll play around with it for a while.

Thanks a ton!