Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

troubles installing zlib

Status
Not open for further replies.
enthusiast

enthusiast

MIS
Aug 1, 2003
11
AT
first, i'm quite new to hp-ux. i just downloaded the source code of openssh and wanted to compile it under hp-ux 10.20. i can do this only if i have zlib. but i get following errors when i try to install zlib:

# ./configure; make test
Checking for shared library support...
Building shared library libz.sl and static library libz.a with cc.
cc +z -O -Aa -D_HPUX_SOURCE -c example.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c adler32.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c compress.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c crc32.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c gzio.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c uncompr.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c deflate.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c trees.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c zutil.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c inflate.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c infblock.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c inftrees.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c infcodes.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c infutil.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
cc +z -O -Aa -D_HPUX_SOURCE -c inffast.c
(Bundled) cc: warning 480: The +z option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -A option is available only with the C/ANSI C product; ignored.
ld -b -s -o libz.sl adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
ld: Invalid loader fixup for symbol "$00000016".
*** Error exit code 1

Stop.
#
 
Sort by date Sort by votes
when i try to install zlib over swinstall, i get following error message:

│ ERROR: Could not access remote file "/opt/zlib/doc/ChangeLog" in ^│
│ │ software item "zlib.zlib-RUN,1" due to an internal error on ││
│ │ the remote system. ││
│ │ ERROR: Failed installing fileset "zlib.zlib-RUN,r=1.1.4". Check the ││
│ │ above output for details. ││
│ │ * Retry number 1 of 1 for loading files for fileset ││
│ │ "zlib.zlib-RUN,r=1.1.4". ││
│ │ * Installing fileset "zlib.zlib-RUN,r=1.1.4" (1 of 1). ││
│ │ ERROR: Could not access remote file "/opt/zlib/doc/ChangeLog" in ││
│ │ software item "zlib.zlib-RUN,1" due to an internal error on │
│ │ the remote system. │
│ │ ERROR: Failed installing fileset "zlib.zlib-RUN,r=1.1.4". Check the ││
│ │ above output for details. ││
│ │ NOTE: The Install Phase has suspended. Check the above output for
 
Upvote 0 Downvote
*veryconfused*
unfortunately i'm not familiar with "swacl" :-
ERROR: "hp817s:/tmp/zlib-1.0.4-sd-10.20.depot": You do not have the
required permissions to perform this SD operation. Please
check to see that you have the required permissions using the
"swacl" command or see your system administrator for
assistance.
 
Upvote 0 Downvote
this time i could install zlib sucessfully :)
again, it was my fault -> i selected wront source depot type, network directory/cd-rom instead of local directory.



best regards...

----------------------------------------


│ │
│ Target: hp817s:/opt/zlib │
│ Logfile: hp817s:/opt/zlib/var/adm/sw/swagent.log │
│ [ ] Automatic Scrolling│
│ ┌───────────────────────────────────────────────────────────────────────────┐│
│ │ ^│
│ │ ======= 08/03/03 22:06:21 METDST BEGIN install AGENT SESSION │
│ │ (pid=979) (jobid=hp817s-0024) │
│ │ ││
│ │ * Agent session started for user "root@hp817s". (pid=979) ││
│ │ ││
│ │ * Beginning Analysis Phase. ││
│ │ * Source: hp817s:/tmp/zlib-1.0.4-sd-10.20.depot ││
│ │ * Target: hp817s:/opt/zlib ││
│ │ * Target logfile: hp817s:/opt/zlib/var/adm/sw/swagent.log ││
│ │ * Reading source for product information. ││
│ │ * Reading source for file information. ││
│ │ * Executing preDSA command. ││
│ │ NOTE: The used disk space on filesystem "/opt" is estimated to v│
│ │ NOTE: The used disk space on filesystem "/opt" is estimated to ^│
│ │ increase by 179 Kbytes. ││
│ │ This will leave 147069 Kbytes of available user disk space ││
│ │ after the installation. ││
│ │ │
│ │ * Summary of Analysis Phase: │
│ │ * 1 of 1 filesets had no Errors or Warnings. ││
│ │ * The Analysis Phase succeeded. ││
│ │ ││
│ │ ││
│ │ * Beginning the Install Execution Phase. ││
│ │ * Filesets: 1 ││
│ │ * Files: 7 ││
│ │ * Kbytes: 175 v
│ │ * Installing fileset "zlib.zlib-RUN,r=1.0.4" (1 of 1). ^│
│ │ ││
│ │ * Beginning the Batch Swmodify Phase ││
│ │ * Ending the Batch Swmodify Phase ││
│ │ ││
│ │ * Running install clean command /usr/lbin/sw/install_clean. ││
│ │ WARNING: Transition links are not created for the filesets installed ││
│ │ at the target. After booting up from the system using ││
│ │ the alternate root at the target, run tlinstall command to │
│ │ create transition links. │
│ │ WARNING: The command "/usr/lbin/sw/install_clean" had warnings. The ││
│ │ installation will continue. Check the above output for ││
│ │ details about the warnings. ││
│ │ * Building the software file "/opt/zlib/var/adm/sw/needs_config" v
│ │ to be used for post-reboot "swconfig" execution. The ││
│ │ information in this file will be used as input to "swconfig" ││
│ │ after the system reboots. ││
│ │ ││
│ │ * Summary of Execution Phase: ││
│ │ * 1 of 1 filesets had no Errors or Warnings. ││
│ │ WARNING: The Execution Phase had warnings. See the above output for │
│ │ details. │
│ │ v│
│ └───────────────────────────────────────────────────────────────────────────┘│

-----------------------------

# tlinstall
NOTE: tlinstall is searching filesystem - please be patient
NOTE: Successfully completed
#
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Shrp
  • Locked
  • Question
help installing IRIX off SuSE server
Replies
0
Views
46
Shrp
Shrp
lampshade
  • Locked
  • Question
Procmail Troubles
Replies
5
Views
29
Annihilannic
Annihilannic
wolwol
  • Locked
  • Question
Installing UNIX dual boot
Replies
1
Views
41
itsp1965
itsp1965
tomeby
  • Locked
  • Question
problem installing 5.0.7 on HP ML570
Replies
1
Views
45
motoslide
motoslide
piperent
  • Locked
  • Question
Cannot link after installing Adaptec driver !
Replies
2
Views
64
piperent
piperent

Part and Inventory Search

Sponsor

Back
Top