Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

trouble

Status
Not open for further replies.

thebook

MIS
Jun 13, 2001
146
CA
I had to reboot my Netware 5 server and now I get several bad errors upon restart:

1) System has been tampered with keyboard locked...

2) asset control error 184

and

3) Administrator password and boot sequence has been cleared.


When I boot up again it says no OS found.



Must have help.
 
Sounds like some kind of hardware security, what kind of box is it?

Or it could just be a dead hard drive. Brent Schmidt CNE, Network +
Senior Network Engineer
provogeek@hotmail.com
East Bay, California; USA
 
Hi

Sounds like the CMOS has been cleared, try to get in and set the drive boot sequence to the way it should be ie. a:c: and CDROM or something which remebles your config.

Regards

David
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top