talltester
MIS
We are running Mercator 6.7(306) on AIX v5.3 and we are having difficulty getting our system into production. The trouble is when we run small test files with just a few transactions, they process just fine with the message getting put on the MQ series queue. However, the problem is that when we try to run a "production size" file (with more than a few hundred transactions), we cannot get the message successfully placed on the MQ series queue. (We will normally be getting files with several thousand transactions per day from our trading partners.) The error we have been getting is:
<TargetReport card="1" adapter="IBM WebSphere MQ (C" bytes="19027038" adapterreturn="-1004">
<Message>Message could not be stored on the queue</Message>
<Settings>-QMN QUEUE.MANAGER -QN EDIInput -T</Settings>
</TargetReport>
Our configuration manager says that the Websphere channels are set as large as they will go, with no effect on our ability to get these "larger" messages on the queue. Any ideas anyone has would be oh so greatly appreciated.
<TargetReport card="1" adapter="IBM WebSphere MQ (C" bytes="19027038" adapterreturn="-1004">
<Message>Message could not be stored on the queue</Message>
<Settings>-QMN QUEUE.MANAGER -QN EDIInput -T</Settings>
</TargetReport>
Our configuration manager says that the Websphere channels are set as large as they will go, with no effect on our ability to get these "larger" messages on the queue. Any ideas anyone has would be oh so greatly appreciated.