trouble with master spreads overlapping

[inf327]

I just recently switched to CS and have had some trouble with layouts. I'll try to explain the problem...

when exporting a pdf the resulting file shows overlapping where one master page is adjacent to another master page within a spread (covering up information). the problem doesnt appear at all within indesign, everything looks fine - it only shows up in the exported PDF. everything looks fine when i export a jpeg as well (i really need a pdf though) i thought at first that i must have created objects that spanned across both pages on my masters but that isn't the case. any help would be greatly appreciated. thanks!!!!

Ian

 

[jmgalvin]

Kind of hard to understand if you're sure that you don's have any items overlapping and any bleeds set too large.

I assume that you also don't have 2 different masters applied to the same page.

Try selecting the Press setting for the pdf export and see what happens. That has the highest tranparency flattening.

Using OSX 10.3.9 on a G4

 

[grafixenter]

Sure that has happened to me too while laying out a report.
But I realised that when you slightly move 'the object', which is overlapping or that should not be showing when you apply a different master page onto that page,the next time 'the object'will not appear when you export to pdf.
But this leaves a gap and it may not look good in the design.
So what I did was to use the Transform pallets' proxy to set the overlapping image just exactly where the 'the object'will be at 0 on the x-axis.
When I exported it, I found it had worked.
So just try out that you perfection.Good Luck.