Trouble with log files

[texan01]

Ok, I have a weird problem that just started. I have several CS1000E's that I take care of but on one of them when I putty into it and do a mdp issp for example, I get the info all together and not by lines, like below. I outed my saved session and rebuilt it but still does the same thing. I know it's something simple but I can't figure it out and I need to run a MIRCC in avaya's espl site and I can't. This is just a sample of what it looks like. Any ideas????

.cpm NO 251 wi01014835 ISS1:1OF1 p32015_1 11/10/2013 p32015_1.cpm NO 252 wi01016398 ISS1:1OF1 p32019_1 11/10/2013 p32019_1.cpm NO 253 wi01008188 ISS1:1OF1 p32020_1 11/10/2013 p32020_1.cpm NO 254 wi01008316 ISS1:1OF1 p32026_1 11/10/2013 p32026_1.cpm YES 255 wi01016303 ISS1:1OF1 p32031_1 11/10/2013 p32031_1.cpm NO 256 wi01018064 ISS1:1OF1 p32044_1 11/10/2013 p32044_1.cpm NO 257 wi01011113 ISS1:1OF1 p32054_1 11/10/2013 p32054_1.cpm NO 258 wi01020043 ISS1:1OF1 p32055_1 11/10/2013 p32055_1.cpm NO 259 wi01020230 ISS2:1OF1 p32057_2 11/10/2013 p32057_2.cpm YES 260 wi01041007 ISS1:1OF1 p32059_1 11/10/2013 p32059_1.cpm NO 261 wi01020959 ISS1

All the other ones look like this.

385 wi01081099 ISS1:1OF1 p32590_1 11/12/2013 p32590_1.cpm NO
386 wi01081467 ISS1:1OF1 p32596_1 11/12/2013 p32596_1.cpm YES
387 wi01078639 ISS1:1OF1 p32605_1 11/12/2013 p32605_1.cpm NO
388 wi01081541 ISS1:1OF1 p32607_1 11/12/2013 p32607_1.cpm NO

 

[GHTROUT]

Set you terminal emulation to VT100 or VT102 if possible. I'm guessing you are using the same settings as on the systemss that display normally.

Is the speed setting at the PBX different? Compare the LD 22 REQ PRT; TYPE ADAN TTY

Is the modem at the PBX different?

~~
Gene at GHTROUT.com

 

[texan01]

Thanks for the response but not using a modem, getting on their network and using putty to log in. I looked at all the settings for my putty session as compared to a working one and looked at the tty settings for the PBX. All the same.

 

[Firebird Scrambler]

Have you tried another program such as "ZOC". You can download it for free and try it. It would be interesting to see if you have the same problem.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Firebird Scrambler]

I forgot to mention that I sometimes get the odd query from people who use the conversion utility excel tool who said that the macro has failed as it's not worked on their log file.

In all cases, I've asked them to send me their TNB printout and I've found that it had captured the data in the same way as you has described when I opened it up in Notepad.

What I did was to use word or word pad etc to convert the data into the correct format.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.