trouble with Cisco 2610

[sergiomondesir]

hi,
Can someone has this before:
router3#telnet 172.16.0.6
Trying 172.16.0.6 ...
*Mar 1 18:10:05.853: As65 DDR: rotor dialout [priority]
*Mar 1 18:10:05.853: As65 DDR: Dialing cause ip (s=172.16.0.244, d=172.16.0.6)
*Mar 1 18:10:05.853: As65 DDR: Attempting to dial 0633729567
*Mar 1 18:10:05.853: CHAT65: Attempting async line dialer script
*Mar 1 18:10:05.853: CHAT65: Dialing using Modem script: dialout & System scrip
t: none
*Mar 1 18:10:05.857: CHAT65: process started
*Mar 1 18:10:05.857: CHAT65: Asserting DTR
*Mar 1 18:10:05.857: TTY65: Set DTR to 1
*Mar 1 18:10:05.857: CHAT65: Chat script dialout started
*Mar 1 18:10:05.857: CHAT65: Sending string: AT
*Mar 1 18:10:05.857: CHAT65: Expecting string: OK
*Mar 1 18:10:10.857: CHAT65: Timeout expecting: OK
*Mar 1 18:10:10.857: CHAT65: Chat script dialout finished, status = Connection
timed out; remote host not responding
*Mar 1 18:10:10.857: TTY65: Line reset by "Async dialer"
*Mar 1 18:10:10.857: As65 DDR: disconnecting call
*Mar 1 18:10:10.857: TTY65: Modem: (unknown)->HANGUP
*Mar 1 18:10:10.857: TTY65: no timer type 0 to destroy
*Mar 1 18:10:10.857: TTY65: no timer type 1 to destroy
*Mar 1 18:10:10.857: TTY65: no timer type 3 to destroy
*Mar 1 18:10:10.857: TTY65: no timer type 4 to destroy
*Mar 1 18:10:10.857: TTY65: no timer type 2 to destroy
*Mar 1 18:10:11.246: TTY65: dropping DTR, hanging up
*Mar 1 18:10:11.246: TTY65: Set DTR to 0
*Mar 1 18:10:11.246: tty65: Modem: HANGUP->IDLE
*Mar 1 18:10:13.257: TTY65: restoring DTR
*Mar 1 18:10:13.257: TTY65: Set DTR to 1
*Mar 1 18:10:14.860: Di65: No free dialer - starting fast idle timer
*Mar 1 18:10:25.858: As65 DDR: re-enable timeout
*Mar 1 18:10:25.858: As65 DDR: Attempting to dial 0033320273825
*Mar 1 18:10:25.858: CHAT65: Attempting async line dialer script
*Mar 1 18:10:25.858: CHAT65: Dialing using Modem script: dialout & System scrip
t: none
*Mar 1 18:10:25.858: CHAT65: process started
*Mar 1 18:10:25.858: CHAT65: Asserting DTR
*Mar 1 18:10:25.858: TTY65: Set DTR to 1
*Mar 1 18:10:25.858: CHAT65: Chat script dialout started
*Mar 1 18:10:25.858: CHAT65: Sending string: AT
*Mar 1 18:10:25.862: CHAT65: Expecting string: OK
*Mar 1 18:10:26.859: Di65: No free dialer - starting fast idle timer
*Mar 1 18:10:30.862: CHAT65: Timeout expecting: OK
*Mar 1 18:10:30.862: CHAT65: Chat script dialout finished, status = Connection
timed out; remote host not responding
I try to connect an external modem(Hayes accura 336 message) in a router.No dial
Thanks

 

[IPKONFIG]

What's your configuration for your modem? What are the commands you have for the modemcap? Post those and we'll take a look.

"I can picture a world without war. A world without hate. A world without fear. And I can picture us attacking that world, because they'd never expect it."
- Jack Handey, Deep Thoughts

 

[sergiomondesir]

Thanks IPKONFIG,
MY modem : Hayes accura 336 message modem model 5349FR. The init string i use : at&fs0=1&c1&d3&k3&q6&q5.
Here is my config :
Building configuration...

Current configuration : 2510 bytes
!
version 12.2
service config
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname router3
!
logging buffered 48000 debugging
enable secret 5 $1$cMPz$S/QCqiXyumwuxRFmqgDRG0
enable password 7 06121B
!
ip subnet-zero
no ip source-route
!
!
no ip domain-lookup
isdn switch-type basic-net3
chat-script dialout "" "AT" OK "ATDT\T" TIMEOUT 30 CONNECT \C
!
!
!
interface FastEthernet0/0
ip address 172.16.0.244 255.255.255.0
no ip mroute-cache
no keepalive
duplex auto
speed auto
no cdp enable
!
interface BRI1/0
description configuration RNIS
no ip address
encapsulation ppp
no ip mroute-cache
isdn switch-type basic-net3
isdn sending-complete
no cdp enable
ppp authentication chap callin
!
interface BRI1/1
description configuration RNIS
no ip address
encapsulation ppp
no ip mroute-cache
isdn switch-type basic-net3
isdn sending-complete
no cdp enable
ppp authentication chap callin
!
interface BRI1/2
description configuration RNIS
no ip address
encapsulation ppp
no ip mroute-cache
isdn switch-type basic-net3
isdn sending-complete
no cdp enable
ppp authentication chap callin
!
interface BRI1/3
description configuration RNIS
no ip address
encapsulation ppp
no ip mroute-cache
isdn switch-type basic-net3
isdn sending-complete
no cdp enable
ppp authentication chap callin
!
interface Async65
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer in-band
dialer pool-member 20
async default routing
async mode interactive
no peer default ip address
no fair-queue
!
interface Dialer65
ip unnumbered FastEthernet0/0
no ip redirects
no ip proxy-arp
encapsulation ppp
load-interval 30
dialer pool 20
dialer idle-timeout 900
dialer string 0805010143
dialer string 0320281282
dialer-group 1
no fair-queue
no cdp enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer65
ip route 172.16.0.6 255.255.255.255 Dialer65
ip route 172.16.0.7 255.255.255.255 Dialer65
no ip http server
no ip pim bidir-enable
!
!
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
no cdp run
snmp-server community n RO
line con 0
exec-timeout 0 0
line aux 0
exec-timeout 0 0
script dialer dialout
modem InOut
no exec
transport input all
transport output pad v120 telnet rlogin udptn
autoselect during-login
autoselect ppp
stopbits 1
flowcontrol hardware
line vty 0 4
password 7 09585A
login
!
!
end
Thanks for help.

 

[IPKONFIG]

Sorry it's taken so long to reply, I've been going over your config and I don't really see any issues that jump out at me. Do you have access to the other router to paste it's configuration?

"I can picture a world without war. A world without hate. A world without fear. And I can picture us attacking that world, because they'd never expect it."
- Jack Handey, Deep Thoughts