Transtalk 9040

[jdobbins311]

I have a Merlin Magix that uses 408mlx cards can I use a transtalk 9040 off of this card? I have the 9040 registered but get no dial tone.

Thanks

 

[IPScec]

From what I can find in the 9040 installation manual, Merlin Magix R1 - 2.5 can be connected through TDL port and all releases that support the Partner ETR card can use an ETR port.

 

[Dexman]

IPScec is correct. Transtalks need either a TDL or ETR port and will work with all Magix releases.

If it ain't broke, I haven't fixed it yet.

 

[tdaugirdas]

It also makes a difference based on which antenna model you have. One model can only connect to Merlin 408 ATL module. The other one will work with either a Magix TDL module or 016 ETR module.

Tom Daugirdas,
President
STCG, Inc.
stcg.com