Transparant LIM

[TJ79]

I want to initiate a Transparant LIM.
This LIM will be set between main PABX and a router.
Only thing that this LIM has got to do is when call is coming in on the main PABX this has to be sent via Transparant LIM to the router without any changes to the number coming in.
I need 2 TLU76/1 in the transparant LIM and one in the main PABX.
Can someone give me a hint how to define this in the main PABX and the transparant lim?

 

[IPuser]

TJ, Why wouldn't you just connect Router directly to TLU76/1 in the Main PBX ? Would be a lot cheaper.

 

[TJ79]

The router is set up for a test, so it will be turned off and on on a regular basis. Because of the Alarm class we want to put a transparant LIM in between so if any alarms on this link will occur the main PABX will not have an alarm.

 

[IPuser]

Once did it like this.

In the Transparent LIM:-
On the Route from the Main PBX
RONDI:ROU=...,PRE=XX;

and on the Route TO the Router:-

RODDI:ROU=...,DEST=XX,....;
NANSI:NUMTYP=ED,NUMSE=XX;