Translation Tables Meridian Opt. 11 C

[Cocolizo]

Hi.

I am a beginner in Meridian World, and at this momment i am finding were i can to change the translation Table, because i need that an extension 229 change to External Line like Extension 000.

A friend told me that this issue is in LD 18 but when i see the ld 18 this doesn't exist, i saw the ld 20 PRT, Type: Pre and Cust: 0, but told me that the Cust, doesn't exist.

help me.

Thank you, and sorry for my english.
Edgar Ramirez

 

[johnpoole]

external to internal is ld 49 idc table.. the dcno has to be applied to the inbound route.. pretranstation is to change the translation of the digits that are send from the keypad.. ld 20 you can prt only..

ld 49
prt
idc
return

ld 21
prt
rdb

and look at the idc prompt, idc = yes then the day and night dcno table number..they can match.. you can use that two tables only if you have 2250 consoles..


john poole
bellsouth business
columbia,sc

 

[Cocolizo]

John.

Thank You for the information, only one question, how can i change the ID for a call Internal to External? For example: I call from 229 to an external call, and i need that the Caller ID will be: 2350-0000 ?

At this momment if i call from 229 the caller ID in an external call is 2350-0229 and i need that this extension in special have a diferent ID.

Thank you in advance.

Edgar Ramirez
Guatemala

 

[vztech]

Ld 15
under CLID

It's only dialtone-VZ

 

[TAnselm]

prt your clid table in ld 21
change it in ld 15.

 

[Cocolizo]

Hi.

Sorry for my ignorance, but i am a beginner in this area, i am in the ld 15 and I saw the entrys but, how can add the ext. 229 and the change Ext.?

Thank You in advance for your understanding.

Edgar
Guatemala

 

[Cocolizo]

At this momment the CLID table that i have to change the Ext. number is below:
LD 15
CLID
Size 256
RNGE
INTL
ENTRY 2
HNTN 000
HLCL 000
DIDN NO
HLOC 000
LSC
---------
And in the Ext. DN i have the SCR Below:

DN= 229
KEY 00 SCR 229 2

But still doesn't work.

Please Help Me
Edgar
Guatemala

 

[TAnselm]

Should work. Here is mine and when I assign "5" to a phone the outbound id is 000-000-0000. Might want to get rid of the zeros in HNTN and HLOC and change HLCL to 7 X zeros.

ENTRY 5
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 0000000
DIDN NO
HLOC
LSC

 

[johnpoole]

one reason it may not work is your provider had to agree to look at that field.. i would ld 96 enl msgi x on my d to see what clid i was sending.. then you can call the provider. you should be sending clid table 2 with your setup

john poole
bellsouth business
columbia,sc