In one of our deployments, we use an FXO port to connect the Cisco VoIP world with a legacy communications system that allows classrooms to talk to the main office.
The way that it works is that the user on the VoIP phone dials 7000, waits to hear a tone (old comm system connected), about 5 seconds, then dials the room number, say 112. What they would like to do is be able to setup 7112 to "automate" the 7000 and 112 process.
I was thinking a Translation Pattern could do the trick but can't figure out how to make the TP wait the 5 seconds to dial 112.
Thanx for ideas or thoughts on how to accomplish this.
rob...
The way that it works is that the user on the VoIP phone dials 7000, waits to hear a tone (old comm system connected), about 5 seconds, then dials the room number, say 112. What they would like to do is be able to setup 7112 to "automate" the 7000 and 112 process.
I was thinking a Translation Pattern could do the trick but can't figure out how to make the TP wait the 5 seconds to dial 112.
Thanx for ideas or thoughts on how to accomplish this.
rob...