Translation Option 81c/CS 1K

[Alan Daniels]

In the DMS/SL family, there is a command of TRAVER ( Translation Verification). This is where you input your originating trunk group and the dialed number and it will give you the general tables that are used as well as the routing.

Is there an equivalent in Option 11c/81c environment? If not, does someone have a detailed list of all the Loads from begin to end for both incoming and outgoing traffic?

Alan

 

[bignose21]

I know the DMS also and there is not a TRAVER command to give you all the routing involved and list of Carriers its routed to that can be done on the switch.

However go to

http://ghtrout.net/

and download the conversion Utility. Then you can use the network Marco to excel the routing data.

So you would print all the DMI, RLI, LSC, DSC, TSC, SPN, NPA, etc. then open the capture file with that macro. It will give you the digits at the Left then RLI it uses plus all the destinations, digit conversion etc.

Closest thing to a TRAVER