transit call with personnal number

[aau2]

Hi, I have three MD joint, if I program a number in the md two as destination the call do transit, but if I program the call as personal number the call doesn´t transit. for example.
If I have the destination :
RODDIEST=11000,ROU=64,ADC=1606100000000250006000000,TRC=5,PRE=92189; the call transit, but with:
PERSONAL NUMBER:11000
LIST CHO ANSPOS TIME BSYCHO ONECAL ORGSEL SMSSEL
1 1 92189 20 11 1 111 0
RODDIEST=92189,ROU=64,ADC=1606100000000250006000000,TRC=5;
The call doesn´t transit

 

[parnum]

try

RODDIEST=92189,ROU=64,ADC=1606100000000250006000000,TRC=5,pre=92189;

best Parnum

 

[TripleT]

Even simpler would be: -

RODDIEST=92189,ROU=64,ADC=1606100000000250006000000,TRC=0,srt=1;

TRC=5 means you are Truncating 5 Digits and therefore you are not actually sending any digits out on the trunks if you use the origianl programming.

What parnum says will work but what happens here is that the Digits are first removed by the TRC=5 and then replaced by PRE=92189. It is better if you do not remove them in the first place.

You will also need to make sure that 92189 is listed in the Number analysis as an External Destination (NUMTYP=ED).