Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Transfer to VM greeting on 3300/Nupoint?
- Thread starter Wythefan
- Start date
there are two ways that I am aware of
one - take a spare analog port (if you have one) or create a non-prime DN and route it to VM. create a VM box for that DN and set up call director for that box to go to a menu and multidigit entry go to the dialed mailbox. put a DSS/BLF of that port on whoever wants to directly transfer to VM or simply transfer to that extension and after VM answers, dial the destination mailbox.
two - create non-prime DN's or hunt groups for each phone (often use *xxxx to make it consistent with what we do for embedded VM). Route them all to VM. in each VM box enter the associated DN as one of the alternate phone numbers.
option one is a lot easier to program and no additional management is required for additions, but option two is more convenient for the customer
one - take a spare analog port (if you have one) or create a non-prime DN and route it to VM. create a VM box for that DN and set up call director for that box to go to a menu and multidigit entry go to the dialed mailbox. put a DSS/BLF of that port on whoever wants to directly transfer to VM or simply transfer to that extension and after VM answers, dial the destination mailbox.
two - create non-prime DN's or hunt groups for each phone (often use *xxxx to make it consistent with what we do for embedded VM). Route them all to VM. in each VM box enter the associated DN as one of the alternate phone numbers.
option one is a lot easier to program and no additional management is required for additions, but option two is more convenient for the customer
- Status
Similar threads
- Locked
- Question