Transfer on an Analog Set

[LittleGremlins]

Trying to get a Dialogic Board working.

Testing lines with an old analog set.
Need to be able to transfer a call to a local extension.
Procedures indicate that we should hit Link and dial the 4 digit extension.
When we press the Link the call immediately dials "0" and goes to the switchboard.

What do we need to do here?

 

[Tbrandes]

Check that XFA is set in CLS of service in load 10 for the set. FYI: if XFR is there it will go to the attendant when a transfer is attempted.

 

[LittleGremlins]

The CLS was XFD, changed to XFA.
Seemed to correct the problem.
Thanks.