Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Traffic measurement 1

Status
Not open for further replies.

PeaveyPhones

Technical User
Dec 5, 2003
219
US
Is there a way to measure traffic from my PPN to EPNs?
Richard

The unexamined life is not worth living; Socrates

 
What type of info are you tring to get? there is a command to look at meas. per ds1 Fac.
 
Simple peg count count will do. But If I could break it down by the hour that might help.
Richard

The unexamined life is not worth living; Socrates

 
Try list measurements ds1-facility, let me know if thats what your looking for
 
list meas ds1 summ 4a02 (or 04a02) both requests come back with "DS1 board had not been administered". 04a02 is the DS Interface in that EPN.
Richard

The unexamined life is not worth living; Socrates

 
list meas ds1 summ 01c18 (PPN DS1 Interface) works. though it only seems to show errors.
Richard

The unexamined life is not worth living; Socrates

 
Yep that's all I know between EPN's. If you use log it will show times that the ds1-fac took hits.
 
Try list meas block pn
then choose either yesterday-peak, today-peak, or last-hour.

This will give you a list of your port nodes and the traffic for them.
 
timclemmc,
That works. I'll have to run a report every hour and add it up, but it will do. Thanks
Richard


The unexamined life is not worth living; Socrates

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top