Tracing a Call trough RDB

[afrchilli1]

Can anybody help me with the following.
Trying 2 trace a cell call going out on a premicell.
Have couple of premicells that has been setup to route two networx(outgoing) trough them.2 of the premicells have a lot of noice on them.How can i trace the call being made through a specific one without having to disable each one of them at a time.

thanx

 

[johnpoole]

your premicells are on trunk ports? ld 80 trac 4 0 0 0, would trace that call if 4 0 0 0 is the analog trunk direct connected to the unit.. you can trace a cot just as quick as you can trace a station.. most often used commands are trad trak and trac, trad is pri/t1's only.. another command i use it entc 4 0 0 0 24:00 return gotr that will trace that tn for 24 hours..

john poole
bellsouth business
columbia,sc

 

[dlesap]

Try the enhanced trace:
LD 80
ENTC (TN) (hhmm) i.e. ENTC 16 0 2 0 0010 for 10 munutes tracing on TN 16 0 2 0
Then GOTR to run automatic trace. You'll have to stay in the LD 80 and look. Each time something is moving on the TN, a trace is generated.
You can add upto 5 TNs to be trace before GOTR.
To exit, DALL or go out LD 80