TRACE LEVEL 3

[nial]

i'm looking for what mml command can use for do a trace level 3 when i call
regards

 

[Avstral]

Here they are:

1 STDEI Signal trace device initiate
2 STDIP Signal trace directory print
3 STDNI Signal trace directory number initiate
4 STISR Signal trace individuals reset
5 STRAP Signal trace read and print
6 STSAP Signal trace search and print
7 STSII Signal trace on signals initiate
8 STTIR Signal trace trace individual reset
9 STTSE Signal trace trace signal end
10 STTSI Signal trace trace signals initiate
11 STTSS Signal trace trace size set
12 STUNI Signal trace unit initiate


Sorry baddy,
It's not possible to post here commands description and results interpretation.

You are really to be on Level 3.
Usually this take 3-5 years.

Start with basic Operation and Maintenance.

 

[nial]

to Avstral
Hello AVSTRAL Among the commands(orders) which you gives me, whom(which) I can utilser to arrest an isdn weft at the moment meme I appeal on the reseaux. The weft I owe the exporter towards an analyzer of weft isdn.

BEST REGARDS

 

[Avstral]

Sorry mate,

I don't understand completelly your question.
If you need to make a signal trace, you can do it with:

STISR:TRI=1;
STUNI:LIM=1,UNIT=SLP60;
STTSI:TRI=1;

STTSE:TRI=1;
STRAP:TRI=1;

To understand results, check it here
thread806-399711

Regards