Hello,
I have started to work with MD 110, ericcson extension manager v.12.2.
I am trying to find the way to do a trace extension. In Cisco is with the d.n.a analyzer. Is there any option in the Extension manager?
Thanks in advance
Hello parnum, thanks for your answer. The 'connections in speech' commands works correctly, but when I try to start the trace as you told me, it appears the following error message.
<STISR;
NOT ACCEPTED
WRONG AUTHOTITY CLASS
<
any idea? Thanks.
parnum, Is it possible that you help me anything else?.
I have checked the authorithy class that I have and it is 5, but I don't know how change it. or maybe you can send me any manual, It is very important to make a trace for me. thanks in advance.
Hello,
I have checked it this command, and I need autority class 5 and I have an autority class 4. How can I change my autority class from 4 to 5.
Thanks in advance.
I have hihger level access and I have done the trace. But I don't understand this trace. The problem is that the user says that the extension is really ringing to somewhere else. This is the reason why I made the trace.
15.27.58.940 00089 HWSW SIGNAL LSUORDERRT (H'00FA)
FROM MULTNO H'FFE0
TO LSSUP (H'0055) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'00 H'00 H'BC H'15 H'00 H'FF H'FF H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
THIS SUBSEQUENCE ORIGINATES FROM LINE 00081
15.27.58.920 00090 SWSW SIGNAL RELTSIND (H'0022)
FROM TSP (H'033B) EXE A IN LIM 001
TO ADP (H'028C) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'00 H'1C H'2D H'02 H'00 H'56 H'B0 H'02 H'00 H'29
010 H'5A
THIS SUBSEQUENCE ORIGINATES FROM LINE 00088
15.27.58.940 00091 HWSW SIGNAL LSUORDERRT (H'00FA)
FROM MULTNO H'FFE0
TO LSSUP (H'0055) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'00 H'00 H'15 H'11 H'00 H'FF H'FF H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
END
/* SUCCEED 15:29:16 */
/* Close view document */
********************************************************
Could you please explaint me if the call is redirect to another phone? I have tried to find any information about it but I have not found it. Any information where can I find information will be appreciate.
These traces can only be read by qualified personel.
You can ask your maintainer to read the trace but even then this is not obvious.
Maybe you can explain what the problem really is so that we can offer a better solution.
please provide more details about the call case. (something like: external party A call extension B but extension B is not ringing).
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.