We have a HIS setup to communicate with a remote AS/400 as a peer node. When we initiate a TP from HIS, everything is smooth and fine. When TP is initiated from AS/400, the moment conversation starts, it is immediately disconnected. The remote end says the disconnection comes from HIS. Event log is full of Event 70 - Event 36 - Event 72 - Even 74 - Event 71 - Event 3050 - Event 3051, repeatedly as we try over and over again.
Since initiation from HIS is fine, I believe I can say the HIS config is OK. Because event log shows no error, I suppose the only next step is to capture the trace. Any suggestion what module / trace type I should get?
Thank you in advance
Since initiation from HIS is fine, I believe I can say the HIS config is OK. Because event log shows no error, I suppose the only next step is to capture the trace. Any suggestion what module / trace type I should get?
Thank you in advance
, but it sounds as though the TP has been setup as invokable. Look up TPSETUP in the HIS online help.