huskerman11
Technical User
TRYING TO PROGRAMM A TOSHIBA DK280 IT LOOKS LIKE YOU NEED A SOFTWARE AND LABTOP TO DO THIS,WHERE CAN I FIND THE SOFTWARE AND IS THERE ANY TECH SUPPORT LEFT FOR THIS SYSTEM,ANY HELP MUCH APPRECIATED,THANKS
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TOSHIBA DK 280 PROGRAMMING
- Thread starter huskerman11
- Start date
- Status
allworxguy
Vendor
All programing can be done from a 20 button set attached to port 005
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
You need the I&M manual or at least the "Program Record Sheets".
It's been ages since I worked on a DK, but I don't recall ever using a "password" for keyset programming, although there is a special key sequence to enter programming mode.
It's been ages since I worked on a DK, but I don't recall ever using a "password" for keyset programming, although there is a special key sequence to enter programming mode.
![[smile]](/data/assets/smilies/smile.gif "[smile] [smile]")
![[love2]](/data/assets/smilies/love2.gif "[love2] [love2]")
"FEATURE 00"- Status
Similar threads
- Locked
- Question
