Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

To Increase size of Existing RAID1

Status
Not open for further replies.

aggalak

Programmer
Dec 1, 2007
1
I have DL 385 server with 2x36 GB on RAID 1. I would like to replace it with 2x72GB RAID 1 setup. Could you please let me know steps I need to follow so that Data is not lost .

Thanks
Aggala
 
Aggala,

You have to replace the first drive with the 72 GB one, wait until the state of the logical disk is idle again, then you have to replace the second one.
After that second drive is synchronized there will be 36 free Gbytes on your logical drive. Then you can increase the logical size.
Then this space will be available in Windows. There you have to decide if you would like to increase the boot disk size (with 3rd party tools like Acronis) or build up a new partition on the disk

Regards

Lorenz
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top