TNs not used for 90 days

[wcmash]

Is there a way for me to find out what TNs have not been used for a certain amount of time? I think I have a lot of them that the phone has just been unplugged and not actually taken out of the system.

Thanks in advance.

 

[PERRYPJ]

Just go to LD 20 and do a LDIS L S, L= loop S=shelf, it will print out any that have been unplugged

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[KCFLHRC]

You will need to run LD 30 for it to disable TN's that don't have a phone plugged in. Unless LD 30 is in your midnight routine. But to your original question, NO, there is no way to see a TN that hasn't been used for 90 days.

 

[30n30w]

If you are using CDR with Call Accounting you could run an abandoned ext or unused ext report. It's pretty standard in most call accounting systems.

30n30w

 

[KCFLHRC]

The LD 30 thing only applies to digital sets also, not analog.

 

[30n30w]

You can also run an inventory in ld 117

inv gen sets

wait for it to run/complete - it takes a while on a large system

then
inv prt sets -

it should show you something like this:
the first three in this list are connected sets - the next four are disconnected sets. it's like doing an idu on each tn.

2006, 008 1 03 13, M2006 NT2K05XH 35 10 5430D7 , BULLMU, none
3903, 008 1 03 14, M3903 NTMN12EA 66 07 113D10 , BASEBS, 2929
3904, 008 1 05 00, M3904 NTMN03EA 70 02 04BAB2 , NICH , 2734
3904, 008 1 15 01, <Unavailable>, OPSRM , 2151
3904, 008 1 15 02, <Unavailable>, OPSRM , 2152
3904, 008 1 15 03, <Unavailable>, OPSRM , 2153
3904, 008 1 15 04, <Unavailable>, OPSRM , 2154

I hope this was helpful.
30n30w