Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TNG connected to BP 250
- Thread starter md110bc10
- Start date
If you have an alarm 65 or 66 reset the system.
Make a test with hyperterminal or another terminal program with these settings:
6006: 10
6007: US_ASCII
6009: 9600
6010: master
6012: cil
6401: the used port number
6402: acivate it (But this is always the last action you have to to when you change the port!)
6403: Call/hotel Cil3 hotel
Make a call and after the call you should see the cil record in your terminal program.
Make a test with hyperterminal or another terminal program with these settings:
6006: 10
6007: US_ASCII
6009: 9600
6010: master
6012: cil
6401: the used port number
6402: acivate it (But this is always the last action you have to to when you change the port!)
6403: Call/hotel Cil3 hotel
Make a call and after the call you should see the cil record in your terminal program.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question