nodialtone
IS-IT--Management
I am looking for the pin out assignment to connect a TN767 via an RJ45 connection to a csu/dsu. Any help would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TN767--Pin Out 3
- Thread starter nodialtone
- Start date
- Status
-
3
- #2
Hi
I have a working cable maked myself for Definity PCM board
25-pair Amphenol to RJ45:
25-pair
AMP________________RJ-45
23____orange________2 (Definity Transmit)
48__white-orang_____1 (Definity Transmit)
22_____blue_________5 (Definity Receive)
47__white-blue______4 (Definity Receive)
must be working...
I have a working cable maked myself for Definity PCM board
25-pair Amphenol to RJ45:
25-pair
AMP________________RJ-45
23____orange________2 (Definity Transmit)
48__white-orang_____1 (Definity Transmit)
22_____blue_________5 (Definity Receive)
47__white-blue______4 (Definity Receive)
must be working...
Dimas,
Your pinout information in this post was the ONLY place I found accurate information for connecting the PBX to a Cisco router. I know your post was directed at a CSU/DSU, but it worked for my router as well.
Most helpful.
Thanks!
Gary <><
Your pinout information in this post was the ONLY place I found accurate information for connecting the PBX to a Cisco router. I know your post was directed at a CSU/DSU, but it worked for my router as well.
Most helpful.
Thanks!
Gary <><
- Status
Similar threads
- Locked
- Question
- Locked
- Question
