tn750c

[testLED]

Ok SO I have a an issue with a random announcement 0 now on the board that wont go away and I have been advised that the board needs erasing.

So what I need to know is the best way to back this up. I am thinking, and correct me if I'm wrong.... Save announcement so they save to the flash card on the main processor, This is a duplicated SPE GV9, erase the board so that it is wiped empty and then restore the board by running the command 'restore announcement disk'

Does this make sense I really need to know the correct procedure so I dont screw it up....

Please advise if you can and let me know if this will work this way

Many Thanks.

 

[Mitch672]

Yes, you are correct... However, when your formated the flash card, you need to do it so you have space for the announcements... It's been a long time, so I don't remember the comands (working on newer systems for a long time now) I do remeber when you do the "save annoucement" command, it takes like 30 minutes to do the backup.

mitch


AVAYA Certified Specialist