Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TN750C Announcement Card Problem

Status
Not open for further replies.

telecomadmin12

Technical User
Apr 27, 2012
406
DE
I just tried to delete an announcement and that seems to be causing problems.
I entered the FAC for recording announcements, then the extension and then 3 to delete. Then I did change announcement and removed the extension from there. But I see that the announcement still shows when I do list integrated-annc-boards as announcement 0. I also don't have any seconds to record left, whereas before I deleted I had some.
INTEGRATED ANNOUNCEMENTS
Board Location: 04B17 Time Remaining at 32Kbps: 0

Annc. Internal Group Announcement Length in
Number Number Number Extension Name Rate Seconds
2 1 5890 Enter Meet-me Digits 64 7
3 2 5891 Enter correct code 32 4
4 3 5892 Wrong code try again 32 3
5 4 5893 try again 32 2
6 5 5994 Invalid Number Intercept 64 5
7 6 5895 Meeting in progress 32 4
8 7 5896 1st member 32 4
9 8 5897 meeting full 32 6
10 9 5998 Bookstore Absence 32 33
11 10 5888 AutoAtta greeting 64 95
12 11 5887 AutoAttd 64 63
13 12 5886 AutoAttd Bookstore Menu 32 9
0 13 32 22
 
Have you tried to busy-out, reset, and release the board? What about remove announcement XXXX (XXXX = Announcement Extension). Also, try to WIN SCP into the board and delete it manually from there? List ip-interfaces val, collect IP address and use WIN SCP. Just some suggestions.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top