TN2302AP HV20 and a G3V9 1

[zeropoint46]

I was wondering about the compatability of the tn2302ap in my Definity system. I can't seem to find any firm documentation out there that says one way or the other whether this card will work or not. I want to add a TN2302AP card and I've see HV04 and HV20, I can't source the HV04 any more but I can source the HV20 so I just wanted to double check that it will be compatible with my system. Here is some info about my definity:

software version: G3V9i.02.0.033.2
PROCESSOR TN2402 000004


thanks for your input.

 

[AvayaTier3]

any tn2302 will work

ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/media/minhardwarevintages.pdf

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[zeropoint46]

thanks for the info, can you tell me the difference between the hv3 and hv20 or where I could find that info? thanks.

 

[AvayaTier3]

http://support.avaya.com/css/appman...ownloads/P0001/5.2.x/C20090710154815434625607

scroll down to the tn2302 latest FW for each HW and read the readme.txt files for each

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[zeropoint46]

thanks again, you're awesome!

 

[AvayaTier3]

NOTE: There are two basic versions of the TN2302AP circuit pack that provide the same functionality:

A) Hardware vintage 3
B) Hardware vintages 11 and greater.

The TN2302AP was first introduced as hardware vintage 3 and was later redesigned with different components. Hardware vintages 11 and greater (HV11+) use different components but provide the same functionality as hardware vintage (HV) 3 circuit packs. HV3 circuit packs cannot be and do not need to be converted to HV11 or greater.

Because of the underlying design differences between HV3 and HV11+, different firmware is required to operate each design. While we strive to keep firmware vintages consistent between the two basic designs, bug fixes unique to a particular design may result in firmware vintage differences between the basic designs. Consequently, a higher firmware vintage (FV) for one basic design (e.g. FV60 for HV11+) does not imply higher functionality than a lower firmware vintage for the other basic design (e.g. FV55 for HV3).



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com